Yes — Genetec is NDAA Section 889 compliant. Genetec is a Canadian (Montreal-headquartered) software company, and its Security Center platform — covering video management, access control, and license-plate recognition — is not made by any Section 889 covered entity (Hikvision, Dahua, Huawei, ZTE, or Hytera) and carries no ownership ties to them.
The important nuance for federal buyers: Genetec is camera-agnostic software, so a deployment is only as compliant as the cameras, recorders, and access hardware connected to it. The platform clears 889; the devices feeding it must be verified per model.
Genetec and Section 889: the platform vs. the devices
Genetec is a software-led platform company. Its flagship Security Center unifies the Omnicast video management system (VMS), Synergis access control, and AutoVu automatic license-plate recognition into one interface. Because Section 889 names specific hardware manufacturers — not software developers — the Genetec platform itself sits outside the covered-entity list, and Genetec is headquartered in Montreal, Canada, with no ownership tie to Hikvision, Dahua, Huawei, ZTE, or Hytera.
The compliance risk with any open VMS is not the software — it is the cameras and edge devices you connect to it. Genetec is camera-agnostic and supports a wide range of ONVIF and manufacturer-integrated devices, which means an operator could, in principle, point Security Center at a banned Hikvision or Dahua camera. Section 889 (implemented by FAR 52.204-25) prohibits the covered equipment regardless of which VMS records it. So a "Genetec system" is only as compliant as the cameras, recorders, and access hardware feeding it.
Building a compliant Genetec deployment
For a federal-grade build, every connected device must come from a compliant manufacturer and be verified at the model level. Genetec integrates natively with compliant camera lines from Axis, Hanwha Vision (Wisenet), i-PRO, Bosch, Avigilon, Pelco, VIVOTEK, and Digital Watchdog, and pairs cleanly with compliant access-control and reader ecosystems such as HID Global, Mercury Security, and STid. Designed and documented correctly, a Genetec Security Center deployment is a strong fit for federal video surveillance, access control, and ALPR programs.
Two compliance regimes apply, and they are separate:
- NDAA Section 889 is a prohibited-source rule. A device is compliant if it is not made by a covered entity and contains no covered components (for example, Huawei/HiSilicon system-on-chips). This is per-SKU — a single brand can ship both compliant and non-compliant models.
- TAA (Trade Agreements Act) is a country-of-origin rule for GSA and many federal contracts: the product must be made or substantially transformed in the US or a TAA-designated country. China is not designated. A device can satisfy 889 yet still fail TAA depending on where the specific model is manufactured, so origin is confirmed per model, not per brand.
Genetec as a software product does not by itself resolve either question for your hardware — that verification has to be done across the full bill of materials.
Where Uniqcli fits
Uniqcli is a TAA and NDAA Section 889-compliant physical-security integrator. We design with Genetec and source the right compliant camera, recorder, and access hardware for each mission. We sell direct, and we confirm both the 889 and TAA posture of every line item, then hand contracting and audit teams the documentation they need to close the file.
That distinction matters for any federal buyer asking whether Genetec is NDAA compliant. The platform answer is yes, but the answer that actually clears an award is a fully documented, device-by-device bill of materials. We deliver the Security Center design and the compliant hardware as one accountable package.
If you are scoping a Genetec deployment or migrating off a non-compliant VMS or camera fleet, request a quote or schedule a compliance assessment with Uniqcli. We will confirm the 889 and TAA status of every device, design the Genetec system around it, and document it for procurement — with no payment required up front.
