Security System Design & Engineering
Front-end consulting, master planning and engineered design for integrated physical-security systems built around vendor-neutral, TAA and NDAA Section 889-compliant architectures. Our engineers translate threat and operational requirements into stamped drawings, device schedules and bid-ready specifications across video, access and intrusion.
- Threat/needs analysis and concept of operations (CONOPS) tied to facility risk profile
- Stamped drawings, riser diagrams, and camera/reader/device placement & field-of-view layouts
- Bill of materials with TAA/NDAA-compliant SKUs (Axis, Hanwha, i-PRO, Bosch)
- Performance specs, basis-of-design narrative, and IP bandwidth/storage calculations
Capabilities engineered in, not bolted on.
Stamped Drawings & Riser Diagrams
Our engineers deliver permit- and bid-ready construction documents: PE-stamped floor plans, riser diagrams, and conduit pathways your GC and AHJ can build to without rework.
Field-Of-View Device Layouts
Every camera, reader, and sensor is placed against modeled sightlines and coverage angles, so you prove pixel-on-target and eliminate blind spots before a single device is hung.
889-Compliant Basis Of Design
Bills of material are scoped to vendor-neutral, TAA and NDAA Section 889-eligible SKUs from day one, keeping your specification clean through federal procurement and audit.
Security System Design & Engineering that holds up to scrutiny.
Front-end consulting, master planning and engineered design for integrated physical-security systems built around vendor-neutral, TAA and NDAA Section 889-compliant architectures. Our engineers translate threat and operational requirements into stamped drawings, device schedules and bid-ready specifications across video, access and intrusion.
We lead with engineering and compliance: the system is designed to standard, installed on genuine warrantied hardware, and documented so it clears procurement and accreditation the first time.
What's included
- Threat/needs analysis and concept of operations (CONOPS) tied to facility risk profile
- Stamped drawings, riser diagrams, and camera/reader/device placement & field-of-view layouts
- Bill of materials with TAA/NDAA-compliant SKUs (Axis, Hanwha, i-PRO, Bosch)
- Performance specs, basis-of-design narrative, and IP bandwidth/storage calculations
- System integration architecture across VMS, access control and intrusion platforms
- Project budget, phasing plan, and migration roadmap from legacy/analog systems
Standards & compliance
Every security system design & engineeringengagement is delivered on TAA / NDAA Section 889-compliant hardware, with country of origin documented and a compliant equivalent quoted whenever a unit isn't designated — engineered to UFC 4-021-02, UFC 4-010-01, UFC 4-020-01 where they apply.
Vendors & systems we use
Vendor-neutral — the right compliant line for the mission.
Engineered designs your contractors can build to
We translate threat assessments and a documented concept of operations into a complete engineered package: stamped drawings, device schedules, IP bandwidth and storage calculations, and a basis-of-design narrative aligned to UFC 4-021-02 and DoD anti-terrorism/force-protection criteria. Because the architecture is vendor-neutral and specified to TAA and NDAA Section 889-eligible products, your A&E firm and general contractor receive a single bid-ready set that survives value engineering and federal review.
- CONOPS and threat analysis tied to your facility risk profile
- Bandwidth, storage, and IP infrastructure calculated up front
- Phasing and migration roadmap off legacy analog systems
One accountable team, the whole lifecycle.
Assess
Risk assessment, coverage gaps and an NDAA/TAA scan of what's already installed.
Design
Engineered, vendor-neutral design — drawings, device schedules and a compliant BOM.
Integrate
Installation and commissioning of video, access, intrusion and the cabling backbone.
Monitor
UL-listed central-station and remote video monitoring with verified response.
Maintain
Preventive maintenance, SLAs, firmware/cyber updates and lifecycle support.
Pairs well with
Security System Design & Engineering — frequently asked
What does security system design & engineering include?
Front-end consulting, master planning and engineered design for integrated physical-security systems built around vendor-neutral, TAA and NDAA Section 889-compliant architectures. Our engineers translate threat and operational requirements into stamped drawings, device schedules and bid-ready specifications across video, access and intrusion. Core deliverables include threat/needs analysis and concept of operations (conops) tied to facility risk profile; stamped drawings, riser diagrams, and camera/reader/device placement & field-of-view layouts; bill of materials with taa/ndaa-compliant skus (axis, hanwha, i-pro, bosch).
Is your security system design & engineering TAA and NDAA Section 889 compliant?
Yes. Every security system design & engineering engagement is delivered on TAA / NDAA Section 889-compliant hardware with country of origin confirmed at the SKU level, and we quote a compliant equivalent whenever a unit isn't designated. Relevant standards: UFC 4-021-02, UFC 4-010-01, UFC 4-020-01, NDAA 889, TAA.
Who is security system design & engineering for?
Security System Design & Engineering is built for Facilities, security directors, GCs, A&E firms. We size and document the system to that environment's threats, compliance posture and budget.
Do you handle the whole lifecycle, or just install?
One accountable team owns it end to end — assess, design, integrate, monitor and maintain — so accountability never falls through a hand-off. Maintenance and SLAs keep security system design & engineering compliant and operational over time.
Start with a design review
Bring us your facility, your threats, and your timeline, and we'll turn them into a buildable, compliant security design.