PSIM / Command & Control Integration
Physical Security Information Management and unified command-and-control that fuse video, access, intrusion, gunshot, C-UAS and perimeter sensors into a single operator picture with guided response workflows. The integrated common operating picture a Base Defense Operations Center requires — and the high-margin convergence service.
- PSIM/unified platform integrating ESS, PACS, IDS and sensors
- Common operating picture with map-based situational awareness
- Standard operating procedure (SOP)/workflow automation per event
- Sensor fusion and alarm correlation across subsystems
Capabilities engineered in, not bolted on.
One Common Operating Picture
Fuse video, access control, intrusion, gunshot, C-UAS and perimeter sensors onto a single map-based display, so one operator assesses an incident without pivoting between disconnected subsystem consoles.
Correlated Alarm Triage
Cross-subsystem correlation rules link a forced door, a fence hit and the nearest camera into one prioritized event, cutting the noise that buries real threats in raw alarm streams.
Guided Response Workflows
Each event type drives a step-by-step SOP at the console, prompting the operator through notification, camera call-up and lockdown actions and time-stamping every step for after-action review.
PSIM / Command & Control Integration that holds up to scrutiny.
Physical Security Information Management and unified command-and-control that fuse video, access, intrusion, gunshot, C-UAS and perimeter sensors into a single operator picture with guided response workflows. The integrated common operating picture a Base Defense Operations Center requires — and the high-margin convergence service.
We lead with engineering and compliance: the system is designed to standard, installed on genuine warrantied hardware, and documented so it clears procurement and accreditation the first time.
What's included
- PSIM/unified platform integrating ESS, PACS, IDS and sensors
- Common operating picture with map-based situational awareness
- Standard operating procedure (SOP)/workflow automation per event
- Sensor fusion and alarm correlation across subsystems
- BDOC/ECC/SOC console design and operator HMI configuration
- Audit logging, after-action reporting and metrics
Standards & compliance
Every psim / command & control integrationengagement is delivered on TAA / NDAA Section 889-compliant hardware, with country of origin documented and a compliant equivalent quoted whenever a unit isn't designated — engineered to UFC 4-021-02, NIST SP 800-53 where they apply.
Vendors & systems we use
Vendor-neutral — the right compliant line for the mission.
Turn scattered sensors into one decisive picture
A Base Defense Operations Center cannot afford an operator hunting across separate VMS, PACS and intrusion screens while an incident unfolds. Our PSIM integration normalizes alarms from your existing ESS, access control and detection sensors into a single map-based operating picture, then drives each event through a defined SOP. Because the platform sits above your subsystems, it preserves your installed investment and stays vendor-neutral as sensors are added or replaced.
- Sensor fusion across ESS, PACS, IDS and perimeter feeds
- Map-based situational awareness with automatic camera call-up
- Audit logging and after-action reporting for every event
One accountable team, the whole lifecycle.
Assess
Risk assessment, coverage gaps and an NDAA/TAA scan of what's already installed.
Design
Engineered, vendor-neutral design — drawings, device schedules and a compliant BOM.
Integrate
Installation and commissioning of video, access, intrusion and the cabling backbone.
Monitor
UL-listed central-station and remote video monitoring with verified response.
Maintain
Preventive maintenance, SLAs, firmware/cyber updates and lifecycle support.
Pairs well with
PSIM / Command & Control Integration — frequently asked
What does psim / command & control integration include?
Physical Security Information Management and unified command-and-control that fuse video, access, intrusion, gunshot, C-UAS and perimeter sensors into a single operator picture with guided response workflows. The integrated common operating picture a Base Defense Operations Center requires — and the high-margin convergence service. Core deliverables include psim/unified platform integrating ess, pacs, ids and sensors; common operating picture with map-based situational awareness; standard operating procedure (sop)/workflow automation per event.
Is your psim / command & control integration TAA and NDAA Section 889 compliant?
Yes. Every psim / command & control integration engagement is delivered on TAA / NDAA Section 889-compliant hardware with country of origin confirmed at the SKU level, and we quote a compliant equivalent whenever a unit isn't designated. Relevant standards: UFC 4-021-02, NIST SP 800-53.
Who is psim / command & control integration for?
PSIM / Command & Control Integration is built for Base Defense Operations Centers, SOCs/ECCs, federal, critical infrastructure. We size and document the system to that environment's threats, compliance posture and budget.
Do you handle the whole lifecycle, or just install?
One accountable team owns it end to end — assess, design, integrate, monitor and maintain — so accountability never falls through a hand-off. Maintenance and SLAs keep psim / command & control integration compliant and operational over time.
Unify your operations center
Tell us which subsystems your BDOC or SOC runs today, and we will map a path to a single operating picture.