Structured Cabling & Low-Voltage
BICSI-standard structured cabling and low-voltage infrastructure — the physical backbone for video, access control and networked security devices. TIA-568 copper and fiber, PoE provisioning, and a certified, fully tested cable plant.
- TIA-568 Cat6/Cat6A copper and OM4/OS2 fiber installation
- PoE/PoE++ switch provisioning for cameras, readers and devices
- Racks, patch panels, cable management, grounding/bonding
- Fluke DSX certification testing with pass/fail reports per run
Capabilities engineered in, not bolted on.
Certified, Tested Cable Plant
Every Cat6/Cat6A and OM4/OS2 run is Fluke DSX-certified with pass/fail reports, so each camera, reader and device drop is proven good before a single endpoint goes live.
PoE & PoE++ Power Budgeting
Switch ports and power budgets are engineered for the actual load of PTZ cameras, multi-reader doors and edge devices — no undersized uplinks or starved drops down the line.
Labeled As-Builts & Warranties
You receive labeled patch panels, cable schedules and updated CAD/Visio as-builts, plus registered manufacturer system warranties from CommScope, Panduit or Belden on the installed plant.
Structured Cabling & Low-Voltage that holds up to scrutiny.
BICSI-standard structured cabling and low-voltage infrastructure — the physical backbone for video, access control and networked security devices. TIA-568 copper and fiber, PoE provisioning, and a certified, fully tested cable plant.
We lead with engineering and compliance: the system is designed to standard, installed on genuine warrantied hardware, and documented so it clears procurement and accreditation the first time.
What's included
- TIA-568 Cat6/Cat6A copper and OM4/OS2 fiber installation
- PoE/PoE++ switch provisioning for cameras, readers and devices
- Racks, patch panels, cable management, grounding/bonding
- Fluke DSX certification testing with pass/fail reports per run
- Labeling, cable schedules and updated CAD/Visio as-builts
- Manufacturer system-warranty registration (CommScope/Panduit/Belden)
Standards & compliance
Every structured cabling & low-voltageengagement is delivered on TAA / NDAA Section 889-compliant hardware, with country of origin documented and a compliant equivalent quoted whenever a unit isn't designated — engineered to TIA-568, BICSI, UFC 3-580-01 where they apply.
Vendors & systems we use
Vendor-neutral — the right compliant line for the mission.
The tested backbone every security system runs on
Cameras, access control and networked devices are only as reliable as the cabling beneath them. We install to BICSI and TIA-568 standards across new construction, retrofits and multi-building campuses, then certify the entire plant with Fluke DSX testing and document every run. The result is an infrastructure layer that passes inspection, carries PoE power cleanly, and won't become the unexplained fault in next year's troubleshooting.
- TIA-568 copper and fiber, grounded and bonded to code
- Fluke DSX certification with per-run pass/fail reports
- Labeling, cable schedules and updated as-built drawings
One accountable team, the whole lifecycle.
Assess
Risk assessment, coverage gaps and an NDAA/TAA scan of what's already installed.
Design
Engineered, vendor-neutral design — drawings, device schedules and a compliant BOM.
Integrate
Installation and commissioning of video, access, intrusion and the cabling backbone.
Monitor
UL-listed central-station and remote video monitoring with verified response.
Maintain
Preventive maintenance, SLAs, firmware/cyber updates and lifecycle support.
Pairs well with
Structured Cabling & Low-Voltage — frequently asked
What does structured cabling & low-voltage include?
BICSI-standard structured cabling and low-voltage infrastructure — the physical backbone for video, access control and networked security devices. TIA-568 copper and fiber, PoE provisioning, and a certified, fully tested cable plant. Core deliverables include tia-568 cat6/cat6a copper and om4/os2 fiber installation; poe/poe++ switch provisioning for cameras, readers and devices; racks, patch panels, cable management, grounding/bonding.
Is your structured cabling & low-voltage TAA and NDAA Section 889 compliant?
Yes. Every structured cabling & low-voltage engagement is delivered on TAA / NDAA Section 889-compliant hardware with country of origin confirmed at the SKU level, and we quote a compliant equivalent whenever a unit isn't designated. Relevant standards: TIA-568, BICSI, UFC 3-580-01.
Who is structured cabling & low-voltage for?
Structured Cabling & Low-Voltage is built for New construction, retrofits, campuses. We size and document the system to that environment's threats, compliance posture and budget.
Do you handle the whole lifecycle, or just install?
One accountable team owns it end to end — assess, design, integrate, monitor and maintain — so accountability never falls through a hand-off. Maintenance and SLAs keep structured cabling & low-voltage compliant and operational over time.
Build it right from the wall up
Tell us about your site and we'll scope a certified cabling plan that your video, access and network systems can depend on for years.